Vicon EXTR∆ 624T - 628T - 632T Farmer

Centre Mounted Mower Conditioners

The Vicon EXTRΔ 624T, 628T and 632T Farmer in working widths of 2.4, 2.8 and 3.2m. They are fitted with the EXTRΔ cutterbar with slim design for improved cutting performance. The mowing units are suspended in the centre of gravity via a large suspension spring. This design provides an even weight distribution across the entire mowing width, as well as a constant, faster and more precise adaptation to ground contours

The Advantages:

  • Available with hydraulic spring adjustment.
  • Centre Mounted Spring Suspension
  • 2.4, 2.8 and 3.2m working width
  • Nylon Tine Conditioning
  • Vertical Transport Solution
  • 600/900 Rpm Conditioner Rotor
  • Vicon BreakBack System

Technical Specifications:

  Working Width No. of Discs Conditioner Power Req, Min
EXTRΔ 624T 2.40m 6 Nylon Tines 50/70 kW/hp
EXTRΔ 628T 2.80m 8 Nylon Tines 60/80 kW/hp
EXTRΔ 632T Farmer 3.20m 8 Nylon Tines 70/90 kW/hp
Vicon EXTR∆ 624T - 628T - 632T Farmer
Video
Animation






Hydraulic Spring Adjustment

This feature provides easy and simple setting of the ground pressure. For greater operator comfort, ground pressure of the large suspension spring is set hydraulically from the tractor cab. On the hydraulic version the tension on the large suspension spring, which controls the ground pressure, is adjusted hydraulically, to increase or lower pressure. The chosen ground pressure level is conveniently registered from the easy-to-read scale.




Nylon Tine Conditioning

  • Due to the nylon tines fitted to the conditioner, the total weight of the machines is kept to a minimum, while keeping an aggressive conditioning.
  • The fixed conditioning fingers are made from high quality nylon, to make them very rigid.
  • This means excellent protection from stones and other obstacles. A perfect solution for farmer and smaller contractor machines!

Centre Suspension

The centre pivot suspension provides an even weight distribution of the EXTRΔ 300 series, 400H, 624T and 628T and a uniform ground pressure over the complete working width, ensuring good ground contour following.

The mowing units are suspended in the centre of gravity. This design provides a constant, faster and more precise adaptation to ground contours.

The benefit is less skid wear, optimum protection of the stubble and less fuel consupmtion.





Protection of Cutterbar

  • To offer maximum protection of the cutterbar, these machines are fitted with the well-known Vicon BreakAway solution.
  • When encountering an obstacle, the BreakAway will swing the machine backwards and over the obstacle, returning it to the original working position once the obstacle has been passed

Two Speed Gearbox

  • The machines also offer a large degree of operating adaptability, as they are factory fitted with the option of being operated with either 540 or 1000 rpm.
  • It requires no additional accessory. All that is needed is to turn the main gearbox on the suspension 180°.

Vertical Transport Solution

  • EXTRΔ 300 series, 624T and 628T are folded into a vertical transport position up to 125°.
  • The low gravity point during transport, with the weight of the mower close to the tractor, provides an excellent weight distribution, even during high speed road transport, and the machine is fixed by the hydraulic lifting arm.
  • In addition transport height is limited, so passing through narrow gateways or under bridges is not a problem.
  • Another benefit is that the hydraulic cylinder also supports quick lifting of the mower from working to headland position.





EXTRA Cutterbar

  • The EXTRΔ cutterbar is designed for low maintenance and offers a very quiet operation.
  • Operators will immediately love the virtually quiet operation of the new cutterbar – convenient during a long and busy working day
  • Fully welded cutterbar for a very strong construction.
  • Even number of contrarotating discs for improved overlap.
  • Three bladed discs for more cuts.
  • Smooth stone guard design for excellent cutting quality.
  • High oil capacity ensuring low working temperature.
  • Low noise level thanks to specially tooled gear wheels.
  • Twisted knives for a clean cut in all conditions.